End of Line Version Revstar (Reverb)


SKU: FGP-LR-REVS Category:

The “Revstar” is a reverb pedal that will give you room and hall type reverb through a “Accutronics” reverb unit. It’s very simple to use with only having 2 knobs for mix and decay so dial in some reverb and away you go.

The blue halo light ring installed diffuses the light when playing live, avoiding being blinded by the standard LEDs just as you are about to go into that all important solo thus giving a larger area to see where the pedal is located easily on the pedal board on darkened stages. The addition of the aluminium foot topper gives you more real estate for contact when switching the pedal on and off during quick changes when playing live.

All Flattley “Platinum Range” pedals are hand processed in our Flattley paint shop. The bare aluminium enclosure is abraded prior to painting with the etch primer. The etch primer acts as a anti corrosive layer and allows the primer to bond to the enclosure ensuring a tough resilient paint finish.

Multiple coats of base coat primer are applied which are then lightly abraded to remove any blemishes or paint speckles prior to the application of the base colour. We apply several coats of base colour until an even coverage occurs and the base colour develops rich smooth depth. Metallic holographic chrome flake is then applied using a clear inter coat which adds that all important Flattley sparkle.

The pedal enclosure is now ready to be hydro dipped in its Flattley graphics. This is the process whereby the graphics are applied using water activated film, the residual PVA film is then washed off and the enclosure is then allowed to dry naturally.

Once dried the lacquer process begins. Each “Flattley Platinum” pedal has a minimum of three coats of lacquer which are all wet sanded between coats. Once the lacquer has hardened, it is then hand polished using three different grades of polishing compounds and it then has a final polish to achieve a high gloss finish using a wool finishing pad. This process gives the smooth deep lustre finish that is inherent in all Flattley Guitar and Bass effects pedals.

Out of stock

Aditional Information

Decay: Controls
the signal to the reverb unit

Mix: Controls the wet to dry signal ratio                  

The Revstar comes in a 125B Enclosure (L x W x
D): 119x64x40mm (including lid) (4.69 x 2.52 x 1.57 inch)

Standard negative centre,-9v dc tip power supply
unit/power brick required

No internal 9v dc battery function 

20mm anodised aluminium custom etched control knobs

Blue halo light ring installed

The Revstar comes with a red custom etched aluminium
foot topper 

This edition comes in red, holographic metal flake
and silver paisley skulls hydro graphics. 

All our pedals are handmade, hand wired, boutique custom guitar and bass
pedal effects manufactured in the UK using only the highest quality components ensuring
every aspect of our pedal’s build process results in a truly outstanding

Further details can be found on all our social media sites on
Instagram/Facebook/LinkedIn/YouTube. Come and follow us/subscribe to see what
we do.

2 reviews for End of Line Version Revstar (Reverb)

  1. Ben

    A staple of my set up. My Revstar lives in the fx loop of my amp, on 99% of the time, providing a great subtle reverb to everything I do.
    Great job for the guys at Flattley.

    • Paul Flattley

      Hi Ben, thanks for the great feed back and we’re delighted you like your revstar reverb pedal. Many thanks, best regards Team Flattley

  2. Chris

    I’m using this as my main reverb sound, it can be subtle, but really sings for big, over the top chord swells and lead lines, it just makes everything sound better!

    Looks great, sounds great and it’s bullet-proof!

    Great job team Flattley!

    • Paul Flattley

      Hi Chris, thanks for the very kind words and we are delighted that you love your Revstar reverb pedal. Many thanks and best regards Team Flattley

Add a review

Saled Products

Products not found