The Phoenix (Stereo Analogue Flanger)
“The Phoenix” is an analogue flanger with stereo outputs. The Phoenix has two delay chips and therefore two separate circuits. When the toggle switch is selected to “normal” only one delay chip is used but when the differential mode is selected the second delay chip is utilized in parallel but out of phase to the first delay chip. When the delay time is turned up you create amazingly deep smooth flanging tones. This is definitely an old school vintage style flanger with amazing deep creamy flanging tones and effects.
All Flattley “Platinum Range” pedals are hand processed in our Flattley paint shop. The bare aluminium enclosure is abraded prior to painting with the etch primer. The etch primer acts as a anti corrosive layer and allows the primer to bond to the enclosure ensuring a tough resilient paint finish.
Multiple coats of base coat primer are applied which are then lightly abraded to remove any blemishes or paint speckles prior to the application of the base colour. We apply several coats of base colour until an even coverage occurs and the base colour develops rich smooth depth. Metallic holographic chrome flake is then applied using a clear inter coat which adds that all important Flattley sparkle.
The pedal enclosure is now ready to be hydro dipped in its Flattley graphics. This is the process whereby the graphics are applied using water activated film, the residual PVA film is then washed off and the enclosure is then allowed to dry naturally.
Once dried the lacquer process begins. Each “Flattley Platinum” pedal has a minimum of three coats of lacquer which are all wet sanded between coats. Once the lacquer has hardened, it is then hand polished using three different grades of polishing compounds and it then has a final polish to achieve a high gloss finish using a wool finishing pad. This process gives the smooth deep lustre finish that is inherent in all Flattley Guitar and Bass effects pedals.
4 in stock
Rate: Controls the speed of the sweep
Depth: Controls the intensity of the sweep
Regeneration: Controls the amount of signal sent back into the delay line
Manual: This allows you to manually control the sweep when the depth control is fully anti-clockwise. It can also act as the delay time when the depth control is not fully clockwise. The manual control is very interactive with the depth control so the more you turn the depth control anti clockwise the more control you will have with the manual control.
Normal/Differential switch: This switch adds or removes a second BBD I/C that is in parallel and out of phase with the primary BBD I/C
- The Phoenix comes in a 1590BBM Enclosure (LxWxD): 119 x 94 x 30 mm (67 x 3.68 x 1.18 inch)
- Standard negative centre,-9v dc tip power supply unit/power brick required
- No internal 9v dc battery function
- 20mm anodised aluminium custom etched control knobs
- Purple LED installed with metal LED bezel
- The Phoenix comes with a custom purple locking nut for the bypass switch
- This edition comes in purple, holographic metal flake and silver paisley skulls hydro graphics.
All our pedals are handmade, hand wired, boutique custom guitar and bass pedal effects manufactured in the UK using only the highest quality components ensuring every aspect of our pedal’s build process results in a truly outstanding product.
Further details can be found on all our social media sites on Instagram/Facebook/LinkedIn/YouTube. Come and follow us/subscribe to see what we do.