Custom made in the UK
Free delivery on all UK orders

Click here to visit our store | Download our product catalogue here.

Bass Ace (Tone Boost)

(2 customer reviews)

£259.00

“The Bass Ace” is our ‘bass centric’ version of  “The Ace” which is a clean boost/buffer with the twist of having the Flattley “Solaris Pro” tone stack allowing it to be used as a clean boost (tone at middle), a treble boost (tone clockwise) or bass boost (tone anti-clockwise) and all stops in between.
It can be used at the front end of a signal chain to push distortion pedals harder and also pre emphasise the frequencies to be distorted.
Placed in mid signal chain, it can help pedals that are a bit dull and quiet, such as vintage pedals by locally boosting gain and tone which in turn brings them to life.
Put last in the signal chain, the pedal can increase the volume of a chain of pedals, enhancing the tone by increasing the presence of a lead tone by lifting the whole sound whilst soloing.
At the mid tone setting, the pedal does give a slight lift in tone that will make most owners smile, push it really hard with another pedal and it will give a soft clip in a pleasant way. It will also help a passive bass guitar sound beefier.
The blue halo light ring installed diffuses the light when playing live, avoiding being blinded by the standard LEDs just as you are about to go into that all important solo thus giving a larger area to see where the pedal is located easily on the pedal board on darkened stages. The addition of the foot switch aluminium foot topper gives you more real estate for contact when switching the pedal on and off during quick changes when playing live.

Volume: Controls the output of the pedal from zero (use as a kill switch), unity gain is around midway and max gives quite a lift to the output. It’s second function is to act as a gain recovery stage for the tone control.

Tone: Midway the tone control is effectively flat and the setting you would use for a straight lift in volume. Either side of midway there is a sweet spot allowing tone to be a little dark (anticlockwise) or have a bit more sparkle (clockwise). Tone fully anticlockwise, the pedal works as a bass boost, fully clockwise it becomes a treble boost with the volume control being used as a gain compensation control as bass boost requires a reduction in overall gain and treble boost usually requires an increase in overall gain.

  • The Bass Ace comes in a 125B Enclosure (LxWxD): 119x64x40mm (including lid) (69 x 2.52 x 1.57 inch)
  • Standard negative centre, -9v dc tip power supply unit/power brick required
  • No internal 9v dc battery function
  • 20mm anodised aluminium laser etched control knobs
  • Blue halo light ring installed
  • The Ace comes with a blue custom etched aluminium foot topper
  • This edition comes in silver holographic metal flake and black graphics.
  • Current consumption 50ma when engaged

2 in stock (can be backordered)

SKU FGP-LR-BACE Categories , ,

Description

Aditional Information

All Flattley “Platinum Range” pedals are hand processed in our Flattley paint shop. The bare aluminium enclosure is abraded prior to painting with the etch primer. The etch primer acts as a anti corrosive layer and allows the primer to bond to the enclosure ensuring a tough resilient paint finish.

Multiple coats of base coat primer are applied which are then lightly abraded to remove any blemishes or paint speckles prior to the application of the base colour. We apply several coats of base colour until an even coverage occurs and the base colour develops rich smooth depth. Metallic holographic chrome flake is then applied using a clear inter coat which adds that all important Flattley sparkle. In this case, The Bass Ace is encrusted with silver metallic holographic flake built up over several layers to give the mesmerising sparkle finish.

Once dried the lacquer process begins. The Bass Ace pedal has a minimum of five coats of lacquer which are all wet sanded between coats. Once the lacquer has hardened, it is then hand polished using three different grades of polishing compounds and it then has a final polish to achieve a high gloss finish using a wool finishing pad. This process gives the smooth deep lustre finish that is inherent in all Flattley Guitar and Bass effects pedals.

The Ace graphics designed by Phoebe Flattley are then applied via UV direct printing.

All our pedals are handmade, hand wired, boutique custom guitar and bass pedal effects manufactured in the UK using only the highest quality components ensuring every aspect of our pedal’s build process results in a truly outstanding product.

Further details can be found on all our social media sites on Instagram/Facebook/LinkedIn/YouTube. Come and follow us/subscribe to see what we do.

2 reviews for Bass Ace (Tone Boost)

There are no reviews yet.

Be the first to review “Bass Ace (Tone Boost)”

Your email address will not be published. Required fields are marked *